How Much Does Home Depot Charge to Install Doors? A Price Breakdown

Home Depot door installation cost generally runs between $200 and $1,500 for a single door, with the spread driven by door type, material, and the condition of the existing frame. Interior slab swaps sit at the low end, while heavy exterior fiberglass units, French doors, or openings needing structural repair push totals toward four figures.

Most quotes bundle labor at $100 to $500 for interior work and $250 to $500 for exterior work, then add the door itself on top.

From baseline labor to specialty exterior work, the article walks through what homeowners typically pay when hiring Home Depot for door installation, then compares those numbers against Lowe’s, Angi, and local contractors.

The Baseline Pricing Most Homeowners Encounter First

Labor alone usually runs between $100 and $500 for an interior door and $250 to $500 for an exterior door, covering a clean swap of a single pre-hung unit into a structurally sound opening. Once the door itself is added, a complete interior project typically totals $200 to $600, while exterior work climbs to a $500 to $1,500 range depending on material and frame carpentry involved.

Specialty configurations shift the math quickly. French doors, double front entries, and sliding patio units can push labor past $1,000 because of glass weight, alignment demands, and longer installation times. Brand choice feeds the door-side cost: a Masonite or JELD-WEN interior slab adds roughly $60 to $150 in materials, while a Therma-Tru fiberglass entry system adds $400 to $900 before labor enters the picture.

Typical Price Ranges by Door Type

These ranges assume a single standard-size door (30″–36″ wide for most interior and entry doors) and an opening that is square, plumb, and free of rot. Once those assumptions break, expect adders.

When those assumptions fail, the line items that follow on an estimate can reshape the total far more than the base product.

What Actually Drives the Price Up or Down

Pre-hung doors almost always install faster than slab doors because the frame, hinges, and hardware arrive pre-aligned at the factory, cutting labor time by 30 to 60 minutes per opening. Slabs require the installer to mortise hinges and drill for the lockset on-site, adding tools, skill, and time that the quote rarely honors with a discount.

Material weight changes the crew size needed. A standard steel exterior unit weighs 50 to 70 pounds and can be set by one installer, while a fiberglass entry with sidelights can top 150 pounds and typically requires two people for safe handling. That second technician adds labor cost that flat-rate quotes rarely surface until installation day.

Frame Condition and Regional Variation

Rotted jambs, uneven framing, or a wider-than-standard rough opening add hours that generic pricing never covers. Most installers charge $40 to $75 per hour for frame repair, and a bad opening can absorb two to four hours before the new door goes in. Inspect the jamb for soft spots or water staining before scheduling so the quote reflects reality.

Geography quietly reshapes every number. Coastal markets (California, the Pacific Northwest, the Northeast corridor) typically run 15 to 25 percent above the national median for door installation labor, while interior Midwestern and Southern cities often sit 5 to 10 percent below. A $300 interior labor charge in Atlanta can read as $375 in Boston for the exact same job.

What the Installation Quote Covers and What It Does Not

Home Depot’s installation quote bundles labor, basic shimming, and securing the new unit into the existing rough opening. That sounds complete until you see how many adjacent tasks live outside that scope.

Removal and haul-away of the old door is sometimes included and sometimes itemized as a separate line, and the distinction is one of the most common sources of friction on installation day. Frame repair, paint touch-up, new trim or casing, and upgraded hardware (smart locks, peepholes, weatherstripping upgrades) almost always bill separately from the base install.

Who Actually Shows Up at Your Door

The crew arriving at your home is not Home Depot staff. Installation work is performed by licensed local subcontractors arranged through the Home Depot Pro Referral Network, which means your installer is an independent business owner who has met Home Depot’s licensing and insurance thresholds but operates separately. This arrangement controls quality through the platform’s warranty but also explains why pricing varies by region: subcontractors set their own rates within Home Depot’s general guidelines.

Because Home Depot sets the framework but lets subcontractors fill in their own labor rates, the next tier of products exposes how thin the baseline really is.

“Get the line items in writing. A quote that says “$400 installed” means very different things depending on whether it includes or excludes old-door removal, haul-away, and any frame carpentry.

Storm, Screen, and Specialty Doors at the Lower End of the Scale

Storm door installation is the cheapest category Home Depot offers, with labor frequently landing between $150 and $250 for a straightforward swap into an existing entry frame. Screen doors and basic interior bifolds sit in the same budget tier because both require minimal frame adjustment and use lighter materials.

Pet doors installed into an existing panel add $100 to $300 on top of the base service when booked as an add-on, though cutting into a new pre-hung unit typically costs less because the installer can plan the cut before hanging.

When Specialty Pricing Climbs Sharply

French, double, and sliding patio doors sit at the opposite extreme, where complexity and glass weight push labor well above $1,000. A sliding patio door can weigh 250 to 400 pounds depending on size and glass package, often requiring two installers and glass-handling equipment. French entries add hinge alignment and weatherstripping precision that single-door crews rarely price the same way.

How Home Depot Stacks Up Against Lowe’s, Angi, and Local Contractors

Lowe’s Installation Services posts comparable base labor rates to Home Depot, typically within $25 to $50 of each other for the same door category. Promotional bundling (10 to 15 percent off labor when buying the door through the same retailer) shifts the effective price enough that shopping both retailers before committing usually pays off.

Angi and independent contractors booked directly often undercut Home Depot by 10 to 20 percent because there is no platform markup, though the savings come with added vetting work on your end.

Side-by-Side Cost Comparison for a Standard Exterior Door

DIY eliminates labor entirely but introduces tool costs ($80 to $200 for a decent door-hanging kit, plus shims, a level, and possibly a new jamb saw), disposal logistics for the old door, and the real risk of a misaligned unit that drafts, sticks, or fails to latch. A poorly hung exterior door leaks air within months and can void manufacturer warranties if the failure traces back to installation error.

The trade-off across providers is accountability. Home Depot’s one-year labor warranty and single point of contact replace the variability of vetting a contractor yourself, which matters when something goes wrong six months after install and you need a callback.

That built-in accountability becomes the deciding factor when homeowners weigh it against the cost savings a local crew might offer.

Booking the Job and Avoiding Surprise Charges on Installation Day

Start with a free in-home or virtual estimate so the quote reflects your specific opening rather than a generic flat-rate guess. Home Depot’s installation services offer both formats, and the in-home version catches rot, framing issues, and size mismatches before anyone loads a truck.

Ask for a written line-item breakdown separating the door, labor, removal, haul-away, hardware, and any anticipated frame repair. A quote that rolls everything into a single number leaves no room to negotiate individual components if you want to swap materials or skip the haul-away.

Scheduling and Warranty Logistics

Confirm warranty terms before booking: Home Depot typically covers installation labor for one year from completion, while the door itself carries the manufacturer’s warranty, often longer. Therma-Tru fiberglass entries, for example, carry limited lifetime coverage on the door skin. File the labor warranty through Home Depot’s installation services team and the product warranty directly with the manufacturer.

Schedule with a buffer of two to four weeks, since subcontractor availability fluctuates by season and region. Spring and fall are peak door-replacement seasons in most markets, and a quote in March for an early-April install often slips into mid-May if the installer backlog runs long.

• ▸Measure twice, order once. Rough opening width, height, and depth must match the new unit within 1/4 inch, or shimming alone won’t save the install.
• ▸Photograph the existing opening. Send clear shots of the jamb, hinges, and surrounding trim to the estimator before the visit.
• ▸Ask about disposal fees. Haul-away sometimes carries a flat $50 to $100 add-on that doesn’t appear in online pricing tools.
• ▸Confirm lock-set compatibility. The standard bore is 2-1/8 inches, but some smart locks require a different backset.
• ▸Clear the work area. Move furniture and wall hangings at least four feet from the opening the morning of installation.

The Bottom Line

Home Depot’s door installation pricing rewards preparation: measure accurately, request an itemized quote, confirm warranty terms in writing, and schedule with realistic lead time. Expect to pay between $200 and $600 for most interior projects and $500 to $1,500 for exterior work, with specialty doors climbing higher. The platform’s value lies less in the lowest price and more in the single point of accountability if something goes wrong after the crew leaves.

FAQ